Impact-Resistant Vehicle-Mounted Trigger Distribution Box (Crash Test Application)
| Quantity | SignalCategory | Instruction | |
| T=0 Input | 1 | Passiveswitch quantity |
Uses2-pinor higherquick connectors(Reference brand:Lemo/ODU) |
| Trigger input signal indication |
1 | RedLED | A dedicatedLEDindicator is installed nextto theinput channelsocket.Whenavalid triggersignalisreceived,the indicator willight upand remainconstantly litto facilitatetheoperator's confirmationoftheequipment's workingstatusafter testing. |
| T=0 Assign output channels |
9 | Passiveswitch quantityoutput |
Eachoutputchannelisisolated fromtheothersandusesa2- pin quick connector(reference brand:Lemo/ODU). |
| T=0 Assign output instructions |
9 | GreenLED | Each output channel socket is equipped with a dedicated LED indicator light.When a trigger signal is output,the indicator light will light up and remain constantly lit to facilitate the operator's confirmation of the equipment'sworking status after testing. |
| Main Switch/T=0 Output Reset Anti-accidental contact main switch |
1 | Color LED | The startup and self-test process takes less than 30 seconds.After the device starts up,it executes a self-test program.If the battery check finds that the battery can last for less than 8 hours under full load,the self-test will fail. |
| Internal Battery Pack |
1 | The rechargeable battery pack provides at least 80 hours of continuous use on a full charge,and charging time is less than 2hours.It features an LED display showing the battery level. |
|
| Power Supply | 1 | 15VDC | A dedicated charger is used to charge the internal battery. |
| Housing Size | 52×90×80mm | ||
| Anti-Shock | 100g@12ms Half sine |

Copy product links
Long by picture save/share
enquiry form:
Inquiry Content:
You have no items to require
